E-8 Tools and Student Machine Shop
Welcome to the official E-8 Tools Web Site.
The student machine shops are located under Sprage library behind
the Galileo lecture halls.
E-8 is taught by Professor Orwin (firstname.lastname@example.org, x.18572).
The shops are maintained by Paul Stovall (Paul_Stovall@hmc.edu, x.73050), Mudd's machinist.
On this web site you can see if a machine is available on the web
cam, learn or review how to use the machines in the shops with the
videos, or look at and print out the drawings or process routers for
any of the tools.